1.
|
Notifying
Member: THAILAND
If applicable, name of local government involved (Article 3.2 and
7.2):
|
2.
|
Agency
responsible:
Thai
Industrial Standards Institute (TISI), Ministry of Industry
Name and address (including telephone and fax numbers, email and
website addresses, if available) of agency or authority designated to handle
comments regarding the notification shall be indicated if different from
above:
WTO/TBT
Enquiry Point and Notification Authority
Thai
Industrial Standards Institute (TISI), Ministry of Industry
Tel: (662)
430 6831 ext. 2130
Fax: (662)
354 3041
E-mail: thaitbt@tisi.mail.go.th
Website:
https://www.tisi.go.th
|
3.
|
Notified
under Article 2.9.2 [X], 2.10.1 [ ], 5.6.2 [ ], 5.7.1 [ ], 3.2 [ ], 7.2 [ ],
other:
|
4.
|
Products
covered (HS or CCCN where applicable, otherwise national tariff heading. ICS
numbers may be provided in addition, where applicable): Prepainted hot-dip 55% aluminium/zinc-coated flat steel (ICS
77.140.50)
|
5.
|
Title,
number of pages and language(s) of the notified document: Draft Ministerial Regulation Prescribing Industrial Products for
Prepainted Hot-Dip 55% Aluminium/Zinc-Coated Flat Steel to Conform to the
Standard B.E. ….; (42 page(s), in Thai)
|
6.
|
Description
of content: The draft Ministerial
Regulation mandates prepainted hot-dip 55% aluminium/zinc-coated flat steel
to conform to the Thai Industrial Standards TIS 2753-25xx(20xx).
This standard
specifies technical specifications, characteristics, marking and labelling,
sampling, and testing requirements for prepainted hot-dip 55%
aluminium/zinc-coated flat steel, coating with a substance with aluminium and
zinc as the main components, in the form of sheets, strips, and corrugated
sheets with minimum thickness of 0.11 mm, with pitch of 76 mm and depth of 18
mm for large corrugated sheets, and pitch of 32 mm and depth of 9 mm for
small corrugated sheets.
|
7.
|
Objective
and rationale, including the nature of urgent problems where applicable: Protection of human health or safety; Quality requirements
|
8.
|
Relevant
documents:
ASTM D
5796-20 Standard Test Method for Measurement of Dry Film Thickness of Thin-
Film Coil-Coated Systems by Destructive Means Using a Boring Device
AS 2728: 2013
Prefinished/prepainted sheet metal products for interior/exterior building
applications - Performance requirements
ISO 17925:
2004 Zinc and/or aluminium based coatings on steel - Determination of coating
mass per unit. area and chemical composition - Gravimetry, inductively
coupled plasma atomic emission spectrometry and flame atomic absorption
spectrometry
JIS G 3193:
2019 Dimensions, shape, mass and permissible variations of hot rolled steel
plates, sheets and strips
JIS G 3322:
2019 Prepainted hot-dip 55% Aluminium-Zinc alloy-coated steel sheet and strip
JIS K
5600-4-4: 1999 Testing methods for paints - Part 4: Visual characteristics of
film Section 4: Colorimetry (Principles)
JIS K 5602:
2008 Determination of Reflectance of Solar Radiation by Paint film
JIS Z 8401:
2019 Rounding of numbers
|
9.
|
Proposed
date of adoption: To be determined
Proposed date of entry into force: After 90 days following the date of its publication in the
Government Gazette.
|
10.
|
Final
date for comments: 30 days from
notification
|
11.
|
Texts available from: National enquiry
point [ ] or address, telephone and fax numbers and email and website
addresses, if available, of other body:
WTO/TBT Enquiry Point and Notification Authority
Thai Industrial Standards Institute (TISI), Ministry of Industry
Tel: (662) 430 6831 ext. 2130
Fax: (662) 354 3041
E-mail: thaitbt@tisi.mail.go.th
Website: https://www.tisi.go.th
|