|
Relevant documents:
1._
EAS 18-1,
Cement — Part 1: Composition, specifications and conformity criteria for
common cements
2._
EAS 18-2,
Methods of testing cement — Part 2: Chemical analysis of cement
3._
EN 450, Fly ash
for concrete — Definitions, requirements and quality control
4._
EN 933-1, Tests
for geometrical properties of aggregates — Part 1: Determination of particle
size distribution — Sieving method
5._
EN 934-2,
Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures —
Definitions and requirements
6._
EN 1008:,
Mixing water for concrete — Specification for sampling, testing and assessing
the suitability of water, including water recovered from processes in the
concrete industry, as mixing water for concrete
7._
EN 1097-3,
Tests for mechanical and physical properties of aggregates — Part 3:
Determination of loose bulk density and voids
8._
EN 1097-6,
Tests for mechanical and physical properties of aggregates — Part 6:
Determination of particle density and water absorption
9._
EN 12350-1,
Testing fresh concrete — Part 1: Sampling
10._
EN 12350-2,
Testing fresh concrete — Part 2: Slump test
11._
EN 12350-3,
Testing fresh concrete — Part 3: Vebe test
12._
EN 12350-4,
Testing fresh concrete — Part 4: Degree of compactability
13._
EN 12350-5,
Testing fresh concrete — Part 5: Flow table test
14._
EN 12350-6,
Testing fresh concrete — Part 6: Density
15._
EN 12350-7,
Testing fresh concrete — Part 7: Air content of fresh concrete — Pressure
methods
16._
EN 12390- 1,
Testing hardened concrete — Part 1: Shape, dimensions and other requirements
for test specimens and moulds
17._
EN 12390-2,
Testing hardened concrete — Part 2: Making and curing specimens for strength
tests
18._
EN 12390-3,
Testing hardened concrete — Part 3: Compressive strength of test specimens
19._
EN 12390-6,
Testing hardened concrete — Part 6: Tensile splitting strength of test
specimens
20._
EN 12390-7,
Testing hardened concrete — Part 7: Density of hardened concrete
21._
EN 12620,
Aggregates for concrete
22._
EN 12878,
Pigments for colouring of building materials based on cement and/or lime
—Specifications and methods of test
23._
EN 13055-1:,
Lightweight aggregates — Part 1: Lightweight aggregates for concrete and
mortar
24._
EN 13263:,
Silica fume for concrete — Definitions, requirements and conformity control
25._
EN 13577:,
Water quality — Determination of aggressive carbon dioxide content
26._
EN 45501:,
Metrological aspects of non-automatic weighing instruments
27._
ISO 2859-1:,
Sampling schemes for inspection by attributes — Part 1: Sampling schemes
indexed by acceptance quality limit (AQL) for lot-by-lot inspection
28._
ISO 3951,
Sampling procedures and charts for inspection by variables by percent
nonconforming
29._
ISO 4316,
Surface active agents — Determination of pH of aqueous solutions —
Potentiometric method
30._
ISO 7150-1,
Water quality — Determination of ammonium — Part 1: Manual spectrometric
method
31._
ISO 7150-2,
Water quality — Determination of ammonium — Part 2: Automated spectrometric
method
32._
ISO 7980, Water
quality — Determination of calcium and magnesium — Atomic absorption
spectrometric method
33._
DIN 4030-2,
Assessment of water, soil and gases for their aggressiveness to concrete —
Part 2: Collection and examination of water and soil samples
34._
ASTM C 173,
Test method for air content of freshly mixed concrete by the volumetric
method
35._ OIML R 117, Measuring systems for
liquids (Organisation Internationale de Métrologie Légale)
36._
Directive
90/384/EEC, Directive of the Council of 20 June 1990 for the harmonization of
the regulations of the Member States concerning non-automatic weighing
equipmen.
|