|
1.
|
Notifying
Member: THAILAND
If applicable, name of local government involved (Articles 3.2 and
7.2):
|
|
2.
|
Agency responsible:
Thai
Industrial Standards Institute (TISI), Ministry of Industry
Name and address (including telephone and fax numbers, email and
website addresses, if available) of
agency or authority designated to handle
comments regarding the notification shall be indicated if different from
above:
WTO/TBT Enquiry Point and Notification Authority
Thai Industrial Standards Institute (TISI), Ministry of Industry
Tel: (662) 430 6831 ext. 2130
Fax: (662) 354 3041
E-mail: thaitbt@tisi.mail.go.th
Website: https://www.tisi.go.th
|
|
3.
|
Notified
under Article 2.9.2 [X], 2.10.1 [ ], 5.6.2 [ ], 5.7.1 [ ], 3.2 [ ], 7.2 [ ],
other:
|
|
4.
|
Products
covered (HS or CCCN where applicable, otherwise national tariff heading. ICS
numbers may be provided in addition, where applicable): Hot-dip zinc– aluminium (0.5% and above) - magnesium (0.4% and
above) - alloy-coated flat steel (ICS 77.140.50)
|
|
5.
|
Title,
number of pages and language(s) of the notified document: Draft Ministerial Regulation Prescribing Industrial Products for
Hot-Dip Zinc-Aluminium (0.5% and above)-Magnesium (0.4% and
above)-Alloy-Coated Flat Steel to conform to the Standard B.E. ….; (51
page(s), in Thai)
|
|
6.
|
Description
of content: The draft Ministerial
Regulation mandates hot-dip zinc-aluminium (0.5% and above)-magnesium (0.4%
and above)-alloy-coated flat steel to conform to the Thai Industrial
Standards TIS 3059-25XX (20XX) Hot-Dip Zinc-Aluminium (0.5% and
above)-Magnesium (0.4% and above)-Alloy-Coated Flat Steel.
This standard
specifies technical specifications, characteristics, marking and labelling,
sampling, and testing requirements for hot-dip zinc-aluminium (0.5% and
above)- magnesium (0.4% and above)-alloy-coated flat steel that may be
chemical-coated to adjust its surface, in the form of sheets, strips, and
corrugated sheets with minimum thickness of 0.11 mm, with pitch of 76 mm and
depth of 18 mm for large corrugated sheets, and pitch of 32 mm and depth of 9
mm for small corrugated sheets.
|
|
7.
|
Objective
and rationale, including the nature of urgent problems where applicable: Protection of human health or safety; Quality requirements
|
|
8.
|
Relevant
documents:
ASTM
A1046/A1046M-22 Standard Specification for Steel Sheet,
Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
ASTM
A924/A924M-19 Standard Specification for General Requirements for Steel
Sheet, Metallic-Coated by the Hot-Dip Process
JIS G 0320:
2022 Standard test method for heat analysis of steel products
JIS G 0321:
2017 Product analysis and its tolerance for wrought steel
JIS K 0119:
2008 General rules for X-ray fluorescence analysis
|
|
9.
|
Proposed
date of adoption: To be determined
Proposed date of entry into force: After 90 days following the
date of its publication in the Government Gazette.
|
|
10.
|
Final
date for comments: 30 days from
notification
|
|
11.
|
Texts available from: National enquiry
point [ ] or address, telephone or fax numbers and email and website addresses,
if available, of other body:
WTO/TBT
Enquiry Point and Notification Authority
Thai
Industrial Standards Institute (TISI), Ministry of Industry
Tel: (662)
430 6831 ext. 2130
Fax: (662)
354 3041
E-mail: thaitbt@tisi.mail.go.th
Website: https://www.tisi.go.th
|