|
1.
|
Notifying Member: PERU
If
applicable, name of local government involved (Articles 3.2 and 7.2):
|
|
2.
|
Agency responsible:
Instituto Nacional de Calidad - Dirección de
Metrología (National Institute for Quality -
Directorate of Metrology)
Calle las Camelias 817, San Isidro - Lima 27 -
Peru
Tel.:
(+51-1) 640-8820, Ext. 1516
Email: jarce@inacal.gob.pe
Name
and address (including telephone and fax numbers, email and website
addresses, if available) of agency or authority designated to handle comments
regarding the notification shall be indicated if different from above:
Ministerio de Comercio Exterior y Turismo, MINCETUR (Ministry of Foreign Trade and Tourism)
Calle Uno Oeste Nº 50 - Urb. Corpac - Lima 27 - Peru
Tel.:
(+51-1) 513-6100, Ext. 1223 or 1239
Email: otc@mincetur.gob.pe
|
|
3.
|
Notified under Article
2.9.2 [X], 2.10.1 [ ], 5.6.2 [ ], 5.7.1 [ ], 3.2 [ ], 7.2 [ ], other:
|
|
4.
|
Products covered (HS or
CCCN where applicable, otherwise national tariff heading. ICS numbers may be
provided in addition, where applicable): ICS: 17.220.20
Measuring instruments, electric energy, static meters
|
|
5.
|
Title, number of pages and language(s)
of the notified document: PROYECTO DE NORMA METROLÓGICA PERUANA PNMP
014-2:2023 - "EQUIPOS DE MEDICIÓN DE LA ENERGÍA ELÉCTRICA. Parte 2: Requisitos
generales y específicos para la protección de las propiedades metrológicas de
medidores de electricidad controlados por software (firmware)" (Draft Peruvian Metrology Standard (PNMP) No. 014-2:2023 -
"Electricity metering equipment. Part 2: General
and specific requirements for the protection of the metrological properties of
electricity meters controlled by software (firmware)"); (38 pages, in
Spanish)
|
|
6.
|
Description of content: The notified draft Peruvian Metrology Standard specifies the
general and specific requirements for the functionality and safety relating
to the legally required software (firmware) in electricity meters described
in PNMP 014-1, PNMP 015 and PNMP 022 as appropriate. The requirements in this
document apply only to electricity meters controlled by software (firmware)
and/or their components.
|
|
7.
|
Objective and rationale,
including the nature of urgent problems where applicable: To notify the adaptation of International Document OIML D 31:2019
"General requirements for software controlled measuring
instruments" and International Recommendation OIML R 46-1/-2:2012
"Active electrical energy meters. Part 1: Metrological and technical
requirements and Part 2: Metrological controls and performance tests"
|
|
8.
|
Relevant documents:
·_
International Document OIML D
31:2019 "General requirements for software controlled measuring
instruments".
·_
International Recommendation
OIML R 46-1/-2:2012 "Active electrical energy meters. Part 1: Metrological
and technical requirements and Part 2: Metrological controls and performance
tests".
|
|
9.
|
Proposed date of
adoption: To be determined
Proposed
date of entry into force: Twelve (12) months
after publication in the Official Journal, El Peruano
|
|
10.
|
Final date for comments:
60 days from notification
|
|
11.
|
Texts available from: National enquiry point [ ] or
address, telephone and fax numbers and email and website addresses, if
available, of other body:
Ministerio de Comercio Exterior y
Turismo - MINCETUR
Calle Uno Oeste Nº 50 - Urb. Corpac -
Lima 27 - Peru
Tel.: (+51-1) 513-6100, Ext. 1223 or
1239
Email: otc@mincetur.gob.pe
Instituto Nacional de Calidad -
Dirección de Metrología
Calle las Camelias 817, San Isidro -
Lima 27 - Peru
Tel.: (+51-1) 640-8820, Ext. 1516
Email: jarce@inacal.gob.pe
https://members.wto.org/crnattachments/2023/TBT/PER/23_13301_00_s.pdf
https://members.wto.org/crnattachments/2023/TBT/PER/23_13301_01_s.pdf
|