1.
|
Notifying Member: THAILAND
If applicable, name of local government
involved (Article 3.2 and 7.2):
|
2.
|
Agency responsible:
Thai Industrial Standards Institute (TISI),
Ministry of Industry
Name and address (including telephone and
fax numbers, email and website addresses, if available) of agency or
authority designated to handle comments regarding the notification shall be
indicated if different from above:
WTO/TBT Enquiry Point and Notification Authority
Thai Industrial Standards Institute (TISI), Ministry of Industry
Tel: (662) 430 6831 ext. 2130
Fax: (662) 354 3041
E-mail: thaitbt@tisi.mail.go.th
Website: https://www.tisi.go.th
|
3.
|
Notified under Article 2.9.2 [X], 2.10.1
[ ], 5.6.2 [ ],
5.7.1 [ ], 3.2 [ ], 7.2 [ ], other:
|
4.
|
Products covered (HS or CCCN where applicable, otherwise national
tariff heading. ICS numbers may be provided in addition, where applicable): Hot-dip
zinc-5% to 13% aluminium-2% to 4% magnesium alloy-coated flat steel (ICS
77.140.50)
|
5.
|
Title, number of pages and language(s) of the notified document: Draft
Ministerial Regulation on Hot-Dip Zinc 0.5% to 6% Aluminium 0.4% to 4%
Magnesium Alloy-Coated Flat Steel (TIS 3059-2563 (2020)); (28 page(s), in
Thai)
|
6.
|
Description of content: The
draft ministerial regulation mandates hot-dip zinc 0.5% to 6% aluminium 0.4%
to 4% magnesium alloy-coated flat steel to conform with TIS 3059-2563 (2020).
This standard specifies technical specifications, characteristics,
marking and labelling, sampling, and testing requirements for hot-dip zinc
0.5% to 6% aluminium 0.4% to 4% magnesium alloy-coated flat steel.
|
7.
|
Objective and rationale, including the nature of urgent problems
where applicable: Protection of human health or safety; Quality
requirements
|
8.
|
Relevant documents:
ASTM
A1046/A1046M-19 Standard Specification for Steel Sheet,
Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
ASTM A924/A924M-19 Standard Specification for General Requirements
for Steel Sheet, Metallic-Coated by the Hot-Dip Process
JIS K 0119: 2008 General rules for X-ray fluorescence analysis
|
9.
|
Proposed date of adoption: To be determined
Proposed date of entry into force: After 180 days following
the date of its publication in the Government Gazette.
|
10.
|
Final date for comments: 60
days from notification
|
11.
|
Texts
available from: National enquiry point [ ] or address, telephone and fax numbers and email and
website addresses, if available, of other body:
WTO/TBT Enquiry Point and
Notification Authority
Thai Industrial Standards
Institute (TISI), Ministry of Industry
Tel: (662) 430 6831 ext. 2130
Fax: (662) 354 3041
E-mail: thaitbt@tisi.mail.go.th
Website: https://www.tisi.go.th
|