|
1.
|
Notifying Member: THAILAND
If applicable, name of local government
involved (Article 3.2 and 7.2):
|
|
2.
|
Agency responsible:
Thai Industrial Standards Institute (TISI),
Ministry of Industry
Name and address (including telephone and
fax numbers, email and website addresses, if available) of agency or
authority designated to handle comments regarding the notification shall be
indicated if different from above:
WTO/TBT Enquiry Point and Notification Authority
Thai Industrial Standards Institute (TISI), Ministry of Industry
Tel: (662) 430 6831 ext. 2130
Fax: (662) 354 3041
E-mail: thaitbt@tisi.mail.go.th
Website: https://www.tisi.go.th
|
|
3.
|
Notified under Article 2.9.2 [X], 2.10.1
[ ], 5.6.2 [ ],
5.7.1 [ ], 3.2 [ ], 7.2 [ ], other:
|
|
4.
|
Products covered (HS or CCCN where applicable, otherwise national
tariff heading. ICS numbers may be provided in addition, where applicable): Hot-dip
zinc-5% to 13% aluminium-2% to 4% magnesium alloy-coated flat steel (ICS
77.140.50)
|
|
5.
|
Title, number of pages and language(s) of the notified document: Draft
Ministerial Regulation on Hot-Dip Zinc 5% to 13% Aluminium-2% to 4% Magnesium
Alloy-Coated Flat Steel (TIS 2981-2562 (2019)); (27 page(s), in Thai)
|
|
6.
|
Description of content: The
draft ministerial regulation mandates hot-dip zinc-5% to 13% aluminium-2% to
4% magnesium alloy-coated flat steel to conform with TIS 2981-2562 (2019).
This standard specifies technical specifications, characteristics,
marking and labelling, sampling, and testing requirements for hot-dip
zinc-aluminium-magnesium alloy-coated flat steel, coil and sheet with consist
of 5% to 13% aluminium 2% to 4% magnesium and 1% other by mass and the
balance zinc that may be chemical-coated to adjust its surface with thickness
not exceeding 9 mm. and width not exceeding 2000 mm.
|
|
7.
|
Objective and rationale, including the nature of urgent problems
where applicable: Protection of human health or safety; Quality
requirements
|
|
8.
|
Relevant documents:
JIS
G 3323: 2012 Hot-dip zinc-aluminium-magnesium alloy-coated steel sheet and
strip
JIS H 0401: 2013 Test methods for hot dip galvanized coatings
JIS K 0119: 2008 General rules for X-ray Fluorescence analysis
|
|
9.
|
Proposed date of adoption: To be determined
Proposed date of entry into force: After 180 days following
the date of its publication in the Government Gazette.
|
|
10.
|
Final date for comments: 60 days
from notification
|
|
11.
|
Texts
available from: National enquiry point [ ] or address, telephone and fax numbers and email and
website addresses, if available, of other body:
WTO/TBT Enquiry Point and
Notification Authority
Thai Industrial Standards
Institute (TISI), Ministry of Industry
Tel: (662) 430 6831 ext. 2130
Fax: (662) 354 3041
E-mail: thaitbt@tisi.mail.go.th
Website: https://www.tisi.go.th
|